BIO-TEC 1200 PUUR is a protective agent, to be mixed with water, for asphalt and tar based on high-quality mineral oils. Creates a well-adhesive protective film and should be used as precautionary. Protects against the adhesion of asphalt and tar residues and facilitates cleaning. Has anti-rust properties which will extend the life of the installation.
Asphalt plants, Asphalt transport vehicles, Asphalt production machines, Road construction machines, ...
After mixing with water, the product can be applied by brush, roller or spray unit. Always ensure adequate ventilation.
Contains no harmful acids and does not attack paint or rubber. A test is recommended before using the product.
Dosage: should always be used diluted with a ratio of 50% water and 50% product.
After BIO-TEC 1200 PUUR has been mixed with water, the mixture can be kept for +-8h.
Spray equipment or machines that are in constant contact with asphalt, e.g. finishers, batch plants,...
Always use preventively as an anti-sticking agent to keep transport units, small equipment and tools, clothing, etc. clean.
Spray enough until the surface is visually covered with oil. If oil drips off, try to dose slightly less.
Unit | Average Value | |
---|---|---|
Плотность при 20 °C | °C | 0.805 |
Температура начала кипения (рефлюкс) | °C | > 250 |
Температура вспышки по Кливленду | °C | > 130 |
Температура застывания | °C | -27 |
20L | 60L | 210L | IBC |